DRS-240

DIN rail power supply with UPS function

  • input voltage 90-305VAC, 127-431VDC
  • compatibility with the SBP-001 programmer (optional)
  • built-in MODBus communication protocol (optional CANBus)
  • regulation of the charging current in the range of 20-100% of the nominal value
    selectable 2- or 3-stage charging curve
  • charging parameters can be programmed
  • relay output: AC OK, DC OK, CHARGER FAIL, BATTERY LOW
  • cooling with open air circulation
  • suitable for lithium-ion and acid batteries
  • working temperature from -30~+70°C
  • operation signaling with LED diode
  • compliance with many standards and certificates
  • 3 years warranty

Prices with discounts and exact stock levels are visible after logging in to the e-shop.

Цена от 171,40 € нетна цена

Висока цена? Влезте в профила си и купете на по-ниска

Наличен на склад

Поръчайте до 12:00 и ще бъде изпратен в рамките на деня

Безплатна доставка от €100

Вижте 8 модела

Promocja cenowa na model HDR-15-5

Продукт, предназначен само за професионална употреба
DRS-240

DRS-240

Модели

Описание

The DRS-240 is a buffer power supply for a DIN rail with a maximum power of 240W. The power supply is available with the following output voltages: 12V, 24V, 36V and 48VDC. The device has two outputs: one for load connection, the other for battery connection. The maximum load of both channels cannot exceed the power supply's rated power (240W). Thanks to the possibility of regulating the charging current, the DRS-240 can work with batteries with a capacity from 5 to even 200AH.

The DRS-240 is equipped with four relay outputs indicating states: AC OK, DC OK, CHARGER FAIL, BATTERY LOW.

The device has the ability to program the curve and change the charging parameters using an external SPB-001 programmer (optional - programming only in CANBus models). Thanks to the MODBus protocol it is possible to constantly monitor and diagnose the device.

DRS-240 will be used in power support systems (e.g. lighting), alarm control panels, monitoring devices and widely understood industrial automation.

 

 

Техническа спецификация

  • DRS-240: DIN rail power supply with UPS function DETAILS
Model Output Tolerance Ripple&Noise Efficiency Power max. Dimensions
DRS-240-12 12V, 0~20A +/-1%
(ładowanie)
150mV 90% 240W 85.5x125.2x129.2mm
DRS-240-24 24V, 0~10A +/-1%
(ładowanie)
240mV 92% 240W 85.5x125.2x129.2mm
DRS-240-36 36V, 0~6.6A +/-1%
(ładowanie)
360mV 92% 240W 85.5x125.2x129.2mm
DRS-240-48 48V, 0~5A +/-1%
(ładowanie)
480mV 92% 240W 85.5x125.2x129.2mm

Свържете се със специалист на Elmark

Имате въпроси? Имате нужда от съвет? Обадете се или ни пишете!