PT-G7728

IEC 61850-3 28-портов Layer 2 full Gigabit модуалрен управляем Ethernet суич

Производител: MOXA
Производител: MOXA
  • IEC 61850-3 Edition 2 Class 2 съвместим
  • Лесна замяна на портове и захранващи модули за непрекъсната работа
  • Вграден MMS сървър, базиран на IEC 61850-90-4 switch data modeling for power SCADA
  • Поддържа IEEE 1588 hardware time stamp
Цена от €3 694,00 нетна цена

Висока цена? Влезте в профила си и купете на по-ниска

При доставка

Безплатна доставка от €100

Вижте 1 модел

Promocja cenowa na model HDR-15-5

Продукт, предназначен само за професионална употреба

Модели

Аксесоари

Описание

Серията модуларни суичове PT-G7728 поддържа до 28 Gigabit порта, включително 4 вградени порта, 6 слота за модулно разширение и 2 слота за захранващи модули, за да осигурят достатъчна гъвкавост за многообразие от приложение. PT-G7728 суичовете са проектирани да посрещнат изискванията на развиващата се мрежа, осигурявайки лесен монтаж и поддръжка, освен това включват и hot-swappable модуларен дизайн, който Ви позволява лесно да променяте или добавяте модули, без да изключвате суича или да прекъсвате мрежовите операции.

Множеството Ethernet (RJ45, SFP и PoE+) и захранващи модули (24/48 VDC, 110/220 VAC/VDC) осигуряват още по-голяма гъвкавост, както и пригодност за различни работни условия, предоставяйки адаптивна пълна гигабитова платформа, която осигурява гъвкавостта и честотната лента, необходими за Ethernet aggregation/edge суич. Сертифицирани по IEC 61850 Edition 2 Class 2, за да осигурят висока надеждност и широка употреба.

Техническа спецификация

  • Ethernet Interface
10/100/1000BaseT(X) Ports (RJ45 connector) 2
100/1000BaseSFP Ports 2
Module 6
Slot Combination See the LM-7000H datasheet for Ethernet and PoE+ modules information
Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
IEEE 802.1X for authentication
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.3x for flow control
  • Ethernet Software Features
Management IPv4/IPv6, SNMP Inform, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 66/67/82, BOOTP, TFTP, LLDP, RARP, HTTP, HTTPS, Telnet, Flow control, Back Pressure Flow Control, Port Mirror, Fiber check, Dying Gasp, SMTP, Syslog
MIB MIB-II, Ethernet-like MIB, Bridge MIB, P-BRIDGE MIB, Q-BRIDGE MIB, RSTP MIB, RMON MIB Groups 1, 2, 3, 9
Filter IGMP v1/v2/v3, GMRP, GVRP, 802.1Q, QinQ VLAN
Redundancy Protocols Link Aggregation, MSTP, RSTP, STP, Turbo Chain, Turbo Ring v1/v2, V-ON
Security RADIUS, TACACS+, SSH, Port Lock, Broadcast storm protection, MAB authentication, Sticky MAC, Access control list
Time Management NTP Server/Client, SNTP, IEEE 1588v2 PTP (hardware-based)
Power Substation IEC 61850 QoS, GOOSE Check
Industrial Protocols EtherNet/IP, Modbus TCP
  • Switch Properties
Priority Queues 8
Max. No. of VLANs 512
VLAN ID Range 1 to 4094
IGMP Groups 4096
MAC Table Size 16 K
Packet Buffer Size 12 Mbits
Jumbo Frame Size 9.6 KB
  • Serial Interface
Console Port Micro USB Type B
  • USB Interface
Storage Port USB Type A
  • Power Parameters
Input Voltage with PWR-HV-P48 installed:
110/220 VDC/VAC for the switch system
48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices)

with PWR-LV-P48 installed:
24/48 VDC for the switch system
48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices)

with PWR-HV-NP installed:
110/220 VDC/VAC for the switch system

with PWR-LV-NP installed:
24/48 VDC for the switch system
Operating Voltage with PWR-HV-P48 installed:
88 to 300 VDC, 90 to 264 VAC for the switch system
46 to 57 VDC for PoE systems

with PWR-LV-P48 installed:
18 to 72 VDC for the switch system
46 to 57 VDC for PoE systems

with PWR-HV-NP installed:
88 to 300 VDC, 90 to 264 VAC for the switch system

with PWR-LV-NP installed:
18 to 72 VDC for the switch system
Input Current with PWR-HV-P48 installed:
PWR input current (switch system)
Max. 0.11 A @ 110 VDC
Max. 0.06 A @ 220 VDC
Max. 0.29 A @ 110 VAC
Max. 0.18 A @ 220 VAC
EPS input current (PoE system)
Max. 0.53 A @ 48 VDC
(excluding power consumption of PoE devices)

with PWR-LV-P48 installed:
PWR input current (switch system)
Max. 0.53 A @ 24 VDC
Max. 0.28 A @ 48 VDC
EPS input current (PoE system)
Max. 0.53 A @ 48 VDC
(excluding power consumption of PoE devices)

with PWR-HV-NP installed:
PWR input current (switch system)
Max. 0.11 A @ 110 VDC
Max. 0.06 A @ 220 VDC
Max. 0.29 A @ 110 VAC
Max. 0.18 A @ 220 VAC

with PWR-LV-NP installed:
PWR input current (switch system)
Max. 0.53 A @ 24 VDC
Max. 0.28 A @ 48 VDC
  • Physical Characteristics
IP Rating IP30
Dimensions 443 x 44 x 280 mm (17.44 x 1.73 x 11.02 in)
Weight 3080 g (6.8 lb)
Installation 19-inch rack mounting
  • Environmental Limits
Operating Temperature -40 to 85°C (-40 to 185°F)
Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
  • Standards and Certifications
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
Power Substation IEC 61850-3 Edition 2.0 Class 2, IEEE 1613
Railway EN 50121-4
Safety EN 62368-1, UL 62368-1
  • MTBF
Time 449,542 hrs
Standards Telcordia (Bellcore), GB

Препоръчани продукти

Свържете се със специалист на Elmark

Имате въпроси? Имате нужда от съвет? Обадете се или ни пишете!