Гейтуей за индустриални протоколи

Features and Benefits

• 4 100BaseT(X) full-duplex RJ45 ports for multiple slave connections
• Supports topology conversion for more flexible EtherCAT networks
• Compact size for easy installation
•  Wide power input range with redundancy options
• IP30-rated metal housing
• Meets the EN 61000-6-2 and EN 61000-6-4 standards for industrial EMC applications
• Supports DIN-rail grounding to optimize space and wiring

Features and Benefits

• 8 100BaseT(X) full-duplex RJ45 ports for multiple slave connections
• Supports topology conversion for more flexible EtherCAT networks
• Compact size for easy installation
•  Wide power input range with redundancy options
• IP30-rated metal housing
• Meets the EN 61000-6-2 and EN 61000-6-4 standards for industrial EMC applications
• Supports DIN-rail grounding to optimize space and wiring

• Поддържа Auto Device Routing за лесно конфигуриране
• Поддържа route by TCP port или IP адрес за гъвкаво разпределение
• Преобразува между Modbus TCP и Modbus RTU/ASCII протоколи
• 1 Ethernet порт и 1, 2 или 4 RS-232/422/485 порта
• 16 едновременни TCP masters с до 32 заявки за master
• Лесна хардуер настройка и конфигуриране

• Поддържа Auto Device Routing за лесно конфигуриране
• Поддържа route by TCP port или IP адрес за гъвкаво разпределение
• Свързва до 32 Modbus TCP сървъра
• Свързва до 31 или 62 Modbus RTU/ASCII подчинени устройства
• Достъп от до 32 Modbus TCP клиента (запазва 32 Modbus заявки за всеки Master)
• Поддържа Modbus serial master to Modbus serial slave комуникации
• Вградено Ethernet каскадно свързване за лесно окабеляване
• 10/100BaseTX (RJ45) или 100BaseFX (single mode или multi-mode със SC/ST конектор)
• Тунели за спешни заявки, осигуряващи QoS контрол
• Вграден Modbus traffic monitoring за лесно отстраняване на неизправности
• Сериен порт с 2 kV изолационна защита (за моделите “-I”)
• -40 до 75°C широк температурен диапазон на работа (при -T модели)
• Резервиращо двойно DC захранване и 1 релеен изход

• Supports Modbus/ASCII, RTU Protocol to control devices
• Allows up to 8 clients to access field data simultaneously
• Up to 31 Independent serial ports if configured to RS-485 serial mode
• Surge protection for RS-485 and power line
• Provides auto-searching device ID Windows utility
• Automatic RS-485 data flow control
• Easy mounting on DIN-rail or panel
• Supports popular HMI software with Modbus/TCP driver or OPC server
• Supports 10/100 Mbps communication speeds

• Supports Auto Device Routing for easy configuration
• Supports route by TCP port or IP address for flexible deployment
• Innovative Command Learning for improving system performance
• Supports agent mode for high performance through active and parallel polling of serial devices
• Supports Modbus serial master to Modbus serial slave communications
• 2 Ethernet ports with the same IP or dual IP addresses for network redundancy
• microSD card for configuration backup/duplication and event logs
• Accessed by up to 256 Modbus TCP clients
• Connects up to Modbus 128 TCP servers
• RJ45 serial interface (for “-J” models)
• Serial port with 2 kV isolation protection (for “-I” models)
• Dual VDC or VAC power inputs with wide power input range
• Embedded traffic monitoring/diagnostic information for easy troubleshooting
• Status monitoring and fault protection for easy maintenance

• 1 x 10/100 Mbps Ethernet port
• Integrates Modbus TCP and Modbus RTU/ASCII networks
• Baud rate: supports up to 230.4 Kbps
• Supports up to 16 connections per serial port under Modbus master mode and 32 sessions under Modbus slave mode
• Built-in 8-kV ESD protection for all serial signals
• Software-selectable RS-232/422/485-2w/485-4w communication
• Supports 32/64-bit Windows 2000/XP/Vista/7/8/8.1/10, Windows Server 2003/2008/2012, and Linux