KNK LED драйвери

• Constant Voltage PWM style output with user changeable frequency up to 4KHz compliant lEEE1789-2015 and EU Ecodesign SVM requirement
• Min. dimming level 0.01%
• Plastic housing with class II design
• Standby power consumption<0.5W
• Integrated KNX control protocol
• No need KNX-DALI gateway
• Typical lifetime>50000 hours

• Constant Voltage PWM style output with user changeable frequency up to 4KHz compliant lEEE1789-2015 and EU Ecodesign SVM requirement
• Min. dimming level 0.01%
• Plastic housing with class II design
• Standby power consumption<0.5W
• Integrated KNX control protocol
• No need KNX-DALI gateway
• Typical lifetime>50000 hours

• constant voltage PWM output with the possibility of changing the frequency up to 4kHz
• plastic casing with insulation class II
• Data Secure protocol
• active PFC system
• no-load power consumption <0.5W
• integrated KNX interface
• short-circuit, overload, overvoltage and thermal protection
• typical life time> 50,000 hours
• working temperature from -40 to + 85 ° C
• efficiency up to 90%
• 5-year warranty

Discounted prices and exact stock levels are visible after logging in to the e-shop.

• built-in KNX interface
• output current set with a switch
• fully insulated plastic housing IP20
• short circuit, thermal and overvoltage protection
• active PFC system
• class II insulation
• working temperature -30 ~ + 90 ° C
• external NTC temperature compensation function
• no-load power consumption <0.5W
• cooperation with emergency lighting
• constant luminous flux function (CLO)
• synchronization function up to 10 units
• no flickering effect
• dimming functions, staircase mode, working hours etc.
• information on energy consumption, selection of logarithmic / linear curve
• 3-year warranty

Discounted prices and exact stock levels are visible after logging in to the e-shop.

• Constant Current mode output with multiple levels selectable by dip switch
• KNX/EIB protocol
• Flicker free design
• Support emergency lighting(EL)
• Integrated constant light output
• Integrated KNX push button interface
• Synchronization up to 10units
• Functions: Manual dim, operation hours, power consumption feedback, log/linear curve selection...etc

• Constant Current mode output with multiple levels selectable by dip switch
• KNX/EIB protocol
• Flickerfree design
• Support emergency lighting(EL)
• Integrated constant light output
• Integrated KNX push button interface
• Synchronization up to 10units
• Functions: Manual dim, operation hours, power consumption feedback, log/linear curve selection...etc